The is designed to work in a highly versatile environment, whether you need Invasive or Non-Invasive ventilation, it delivers both. It is micro-processor controlled design with wide range of Ventilation modes to suit individual preferences.
· Suitable for adult and paediatric patients
· Built-in turbine technology
· Pressure & Flow waveforms with Trends Facility
· FiO Measurement 2
· Suitable with both dual as well as single limb breathing circuits
· Patient History storage capability
· Automatic Parameters adjustment of patient according to Height & Weight
· Provision for 100% oxygen for a period of 2 mins. before disconnecting for suctioning
· Inspiration hold: Measures patient’s lung compliance and resistance, Elasticity, Time constant
· Key lock: Key & LCD Radiogram Touch Screen Lock
· Waveform freeze: Freezes the waveform with scrolling facility
· Alarm silence: Mutes audible alarms for 2 mins.
· Alarm reset: Clears visual indicators and messages
· Easily detachable from trolley and moves with patients
· Mobile stand with quick-release
· APNEA backup with option PACV, VACV with pressure limit
· Shock Resistant (Drop Test certified)
· Touch screen as well as knob operated
· Altitude compensation
· 2000 Events storage, alarms and settings
· High pressure O supply inlet – To connect to wall 2 outlet, O cylinder 2
· Low flow O supply inlet – To connect to O 2 2 concentrator
· BTPS reduces Tidal Volume error
Pneumatically Driven Ventilator
Driven from pipeline/cylinder/ Air compressor
Mains and battery operated.
Bar graph displays dynamic airway pressure showing upper and lower pressure limits.
Displays Peak Pressure Digitally for every breath
Settable parameters – BPM, I:E ratio pressure limits and inspiratory flow rates
21% – 100% FiO settings. 2
Built-in audio-visual alarms
Inverse Ratios : The ventilator has the ability to adjust substantially when clinical conditions require inverse I:E.
Inspiratory flow cut off : The inspiratory phase changes to expiratory in case the dynamic pressure reaches the high-pressure limit. High-pressure Audio-visual alarm will also be activated.
Apnea alarm/ low airway pressure alarm : If the dynamic pressure fails to go above the low-pressure limi with in 15sec, then the low airway audio visual pressure alarm will be activated.
Works on A-CMV : With the Preset (-) 5 cmHO of trigger 2 level the ventilator has the ability to synchronize with the patient breath. Air/ O2 Blender : Built in oxygen and Air blender that gives 21% to 100% setting of FiO
Tidal Volume 50ml–1500ml
Display 3.2″ Mono-chromatic
FiO2 21–100 %
I:E Ratio 4:1–1:10
Inspiratory gas flow control 0.1–1.0 L/Sec
Built-in pressure relief valve 70cmHO2
Patient Trigger (-)5cmHO (Fixed) 2
Supply pressure 280–700 kPa (45–100 psi)
Graphical Pressure indication (-)10–80cmHO2
Power Supply 220V–240V AC 50Hz
Internal Battery Backup 4hrs.
Standard Accessories Ventilator Main Unit High Pressure Hose Breathing Hose 2/3 Ltr. O Cylinder 2 Breathing Valve Face mask Regulator with Flowmeter & Gauge Cylinder Re lling Attachment Dust Proof Carry Bag Dust Proof Carry Bag Pneumatically Driven Ventilator ü Driven from pipeline or cylinder operated with an automatic switch-over valve ü IPPV Ventilation Mode ü Adult & Pediatric ü I:E Ratio Preset (1:2) Oxygen Concentration 100% Minute Volume (Adjustable) 2–15 Ltr/min Breathing Frequency (Adjustable), at Sea Level 8–30 bpm Noise <65 db Cylinder Time - 3 Ltr. cylinder when fully charged (using MV of 6 l/m) >60 min Driving Gas Pressure 280–600 kPa Dimensions (mm) W x H x D 116 x 61 x 191 Weight 1.5 Kg Storage Temperature 0°C–50°C Operating Temperature 0°C–50°C Storage Atmospheric Humidity Up to 95% Operating Atmospheric Humidity Up to 90%
Ventilator is an intelligent and universal effective solution for neonatal to adult patients. Intuitive and simple user interface with quick operational readiness with an automatic device check provides con???dence in use and reduces training time. Wide range of ventilation mode makes it suitable for various clinical requirement in Intensive care units.
Ease of Use
Compatible for intubated and non-intubated patient’s ventilation. Simple user interface and effortless operation makes to be intuitive and require minimum amount of training for the medical and nursing staff.
Predicted Body Weight (PBW) Predicted body weight function is the most simple way of starting and providing ventilation herein all the parameters of the patients are set automatically according to his/her body weight. 8ml/ kg is the default PBW function which is pre-set in the ventilator, this value is user configurable as per the requirement.
CPR Ventilation (Cardiopulmonary Resuscitation) CPR mode that provides resuscitation and chest compression assistance (beep sound) tothe patient under cardiac arrest.
Closed Suction Support During Suction the negative pressure can cause auto- triggering which is very harmful for the patient. Closed Suction Support The is equipped with closed suction support system, on its activation the existing ventilation mode is suspended and the ventilator shifts on to CPAP mode with SET PEEP+ 3 cmHO of pressure support at 2 the same time O boost (100% O) is given to the patient.
|Display||High-Luminance 7 inches TFT, Coloured screen|
|Drive Mechanism||Pneumatically driven electronically controlled combines sophistication and ease of use|
|Patient Type||Suitable for both adult and pediatric patient|
|Applications||Invasive and Non-Invasive|
|Monitoring of Parameters||Tidal Volume, Peak pressure, Plateau Pressure, Dynamic Compliance, FiO2 Value, I:E Ratio, PEEP, Breathing Frequency, Minute Volume|
|Lung Mechanics||P-V, P-F Loops and Pressure, Volume and Flow Graphs|
|Settable Parameters||Tidal Volume, Inspiratory Pressure, PEEP, I:E Ratio, Pressure Support, Breathing Frequency, Plimit, SIGH, Inspiratory Time, Insp. Hold, Pressure & Flow Triggers, T-Apnea, CPAP Levels|
|Alarms||Peak Airway Pressure (High & Low), Minute Volume (High & Low), FiO (High & Low), Low Gas 2 Supply, Battery Low, Apnea, Power Failure|
|Ventilation Modes||VACV, PACV, P-SIMV+PSV, V-SIMV+PSV, SPONT/CPAP+PSV, PSV, Apnea Back-up Ventilation|
|Apnea Time||1–59 sec|
|Tidal Volume Range||20–1600 ml|
|Breathing Frequency||1–100bpm, SIMV : 1–40bpm|
|O2 Supply||4–7 bar|
|Power Mains||220-240v AC Supply|
|Battery||2 Hours of continuous operation|
|Weight (Main Unit)||14 Kg. Approx.|
|Dimension (Main Unit)||H376mm x W440mm x D372mm|
|Weight (Compressor)||51 Kg. Approx.|
|Dimension (Compressor)||H575mm x W480mm x D560mm|
|Standard Accessories||Patient breathing circuit with expiratory valve 1 No.|
|Face Mask 1 No.|
|Power Cable 1 No.|
|High Pressure Air and Oxygen Tubing 1 Each|
|Flow Sensor with Tubing Connection 1 No.|
|User Manual 1 No.|
|Optionals||– Medical Air Compressor|
|– Touch Screen|
|– Regulator for O2 Cylinder|
|Is It ISO Certified||ISO Certified|