Plastic Labware >> Flask Test Tube Stands

Moulded in polypropylene, this flask stand gives a stair like top view. Every step provides excellent support to the round bottom flask at every point of contact. This flask stand can hold round bottom flasks up to 10 ltr. Capacity. This stackable flask stand can also be steam autoclaved.
Material : Polypropylene

S No.	Particulars
1	Flask stand

This transparent polypropylene cap for test tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer grooves would hold identification labels. The built in seal ring would set in the tube making the combination a leafproof one.
Material : Polypropylene

S No.	Particulars
1	Cap for test tube 25 mm

A handy, little, space saver, this circular twelve place Polypropylene test tube stand has four 25mm dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 vertical pins for drying tubes surrounded by a trough a catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose.
Material : Polypropylene

S No.	Particulars
1	19 mm. & 25 mm. Tube

These racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque. These autoclavable racks can withstand sub-freezing temperatures.
Material : Polypropylene

S No.	Particulars
1	13 mm x 31 tubes
2	16 mm x 31 tubes
3	20 mm x 20 tubes
4	25 mm x 12 tubes
5	25 mm x 18 tubes
6	32 mm x 12 tubes
7	25 mm x 36 tubes
8	13 mm x 18 tubes
9	15 mm x 18 tubes
10	18 mm x 12 tubes
11	13 mm x 62 tubes
12	16 mm x 62 tubes
13	20 mm x 40 tubes

Material : Polycarbonate

S No.	Particulars
1	13 mm x 31 tubes
2	16 mm x 31 tubes
3	20 mm x 20 tubes
4	25 mm x 12 tubes
5	13 mm x 62 tubes
6	16 mm x 62 tubes
7	20 mm x 40 tubes
8	25 mm x 24 tubes
9	25 mm x 18 tubes
10	25 mm x 36 tubes
11	32 mm x 12 tubes

These non-corrosive, moulded retort stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5 mm x 750 mm can be screwed into the heavy base giving way to a perfectly stable retort stand.
Material : N/A

S No.	Particulars
1	225x150 mm-side hole
2	300x200 mm-centre hole
3	300x200 mm-side hole